Wipers Inoperative - One or More Modes
WIPERS INOPERATIVE - ONE OR MORE MODESTEST DESCRIPTION
Steps 1 - 3:
Steps 4 - 7:
Steps 8 - 10:
Steps 11 - 18:
The numbers below refer to the step numbers on the diagnostic table.
8. This step tests for continuity through the 24 kOhms resistor in the windshield wiper/washer switch.
9. This step tests for continuity through the delay resistors in the windshield wiper/washer switch. The measured resistance will change in sequence from high to low as the delay speed is increased.