Sunroof / Moonroof: Adjustments
VERTICAL ADJUSTMENT OF SLIDING PANELVertical Adjustments (Front):
1. Adjust the front of the sliding panel by opening the panel halfway. A 7 mm open end wrench can then be used to loosen the front guide bolts. Adjust the panel and tighten the guide bolts.
Vertical Adjustments (Rear):
2. Adjust the rear of the sliding panel by placing the panel in the vent position. Loosen the rear cam attaching bolts, adjust the panel, and tighten the cam bolts.
3. Optional-To adjust the panel in the closed position, the bezel must first be unscrewed and slide rearward. The adjusting bolts are then accessible.
SYSTEM TIMING
1. With panel removed, remove retainer cover and disengage cable from gear.
2. Position both cable guides at holes in track.
Drive Gear Service:
3. Reinstall cables into gear, taking care not to move cable, reinstall retainer cover.