Hydraulic Control System

The hydraulics of the 41TE transaxle provide;

^ The Manual Shift Lever Select Function
^ Main Line Pressure Regulation
^ Torque Converter Flow Control
^ Cooler Flow Control

Oil flow to the friction elements is controlled directly by four solenoid valves.

Torque Converter Clutch Control Valve

The hydraulics also include a unique logic-controlled "solenoid torque converter clutch control valve".

^ This valve locks out the 1st gear reaction element with the application of 2nd, direct, or overdrive gear elements.

^ It also redirects the 1st gear solenoid output so that it can control torque converter clutch operation.

Regaining Access To 1st Gear

To regain access to 1st gear, a special sequence of solenoid commands must be used to unlock and move the solenoid torque converter clutch control valve.

^ This precludes any application of the first gear reaction element with other elements applied.

^ It also allows one solenoid to control two friction elements.

High-Rate Accumulators

Small, high-rate accumulators are provided in each controlled friction element circuit. These serve to absorb the pressure responses, and allow the controls to read and respond to changes that are occurring.