Instrument Cluster / Carrier: Service and Repair

Disable airbag, refer to Air Bags and Seat Belts/Air Bags (Supplemental Restraint Systems)/Service and Repair. After procedure has been completed, rearm airbag system.

1. Disconnect battery ground cable.
2. Remove cluster bezel attaching screws and bezel.
3. On models with column shift, proceed as follows:
a. Remove lower steering column cover and place gear selector in neutral or park position.
b. Remove PRNDL cable eyelet from column actuating arm.
c. Release lock bar on column insert and remove insert from column.
d. Secure insert and cable out of the way.
4. On all models, remove rear window and radio bezels.
5. Remove cluster attaching screws and pull cluster from dash.
6. Disconnect two electrical connectors and remove cluster.
7. Reverse procedure to install, adjusting PRNDL pointer if necessary.