Unit Inspection

To check, remove engine coolant temperature gauge unit from intake manifold.

Engine Coolant Temperature Gauge Inspection: Step (1):

Standard Resistance of Engine Coolant Temperature Gauge Unit
1. Immerse unit in 70°C (158°F) water to measure resistance.
Standard value: 104 ± 13.5 Ohms

Engine Coolant Temperature Gauge Inspection: Step (2):

2. After checking, apply the specified adhesive around the thread of engine coolant temperature gauge unit and install on the intake manifold.

Specified sealant: MOPAR Part No. 4318034 or equivalent.