Technician Safety Information

WARNING: Before testing vehicle turn the ignition switch to off or lock position, apply parking brake and put the vehicle in park or neutral.

- Ignition systems present a shock hazard; exercise care and always use insulated pliers when performing spark test.

- Avoid creating an arc between an ignition spark source and any fuel related component.

- Do not crank the engine if there is a fuel leak or spillage present.

- Always wear appropriate eye protection.

- Do not touch transistor on control unit when the ignition switch is on as it will cause an electrical shock.

- Block the drive wheels as a safety routine before beginning any service with the vehicle on the ground.

- Never work under a vehicle supported only by a jack. Use jackstands on a flat level hard surface.