Turn Signal Description

TURN SIGNALS
Voltage for the turn signals flows from the Power Distribution Center (PDC) to the ignition switch on circuit A2. With the key in the RUN position, the ignition switch connects voltage from the A2 circuit to the A22 circuit. A 30 amp maxi fuse in the PDC protects the A2 and A22 circuits.

Circuit A22 connects to a bus bar in the fuse block. L5 is one of the circuits fed by the bus bar. Circuit L5 contains a 10 amp fuse, and supplies voltage to cavity 2 of the multi-function switch. The multi-function switch supplies voltage to the combination flasher unit on circuit L55. Voltage leaves the combination flashing unit on circuit L32 and flows to cavity 3 of the multi-function switch connector.