Headlamp Switch: Testing and Inspection

^ Cavity 7 (circuit L20) of the headlamp switch connector is double-crimped to feed the Daytime Running Lamp (DRL) module.

^ Check for a blown fuse in cavity 17 for L43 and in cavity 18 for L44.

^ Check the 40 amp maxi fuse located in the Power Distribution Center (PDC).

^ The headlamp switch has a 24 amp internal circuit breaker.

^ For the left front parking lamp, turn signal, side marker lamp, and left headlamp, the Z1 circuit grounding point is on the left side of the radiator closure panel.

^ For the right front parking lamp, turn signal, side marker lamp, and right headlamp, the Z1 circuit grounding point is in the right fender side shield.

^ For the left rear parking lamp, turn signal, side marker lamp, and the rear license plate, the Z1 circuit grounding point is in the left rear wheel well.

^ For the right rear parking lamp, turn signal, and side marker lamp, the Z1 circuit grounding point is in the right rear wheel well.