PROM - Programmable Read Only Memory: Technical Service Bulletins

• Recalls
  • Recall - Reprogram (flash) PCM
    • Overview
    • Service Procedure
      • A. Reprogram the PCM
      • B. Install Authorized Software Update Label
      • C. Install the Recall Completion Label
      • D. Complete Proof of Correction Form
    • Owner Letter
• Customer Interest
  • I/M Testing - OBDII CARB Readiness Monitor Information
    • Overview
    • Repair Procedure
  • PCM - OBDII Readiness Code Retention
  • PCM - Cold Start Hesitation/Sag/Stumble,Idle Variation
  • PCM - O2 Sensor Faults/MIL ON
• All Technical Service Bulletins
  • Engine Controls - Flash Programming Failure Recovery
    • Overview
    • Connected/Disconnected Flash Mode Using TechCONNECT
    • Pay Attention While Performing Flash Reprogram Procedures
    • Error Messages
    • Enhanced and Original Abort Recovery
    • Enhanced Abort Recovery Screens
    • Original Abort Recovery Screen
    • Programmable Modules
    • Powertrain Modules - Engine and Transmission
  • I/M Testing - OBDII CARB Readiness Monitor Information
    • Overview
    • Repair Procedure
  • Recall - Reprogram (flash) PCM
    • Overview
    • Service Procedure
      • A. Reprogram the PCM
      • B. Install Authorized Software Update Label
      • C. Install the Recall Completion Label
      • D. Complete Proof of Correction Form
    • Owner Letter
  • PCM - OBDII Readiness Code Retention
  • PCM - Cold Start Hesitation/Sag/Stumble,Idle Variation
  • PCM - O2 Sensor Faults/MIL ON