Engine Mount

Mount Bracket Bolts 41 Nm (30 ft. lbs.)

BOLT TIGHTENING SEQUENCE
a. If engine mount bracket was removed, tighten bolt 1 to 3 Nm (20 inch lbs.) and bolts 2, 3 and 4 to 108 Nm (80 ft. lbs.).
b. If engine mount bracket was removed, tighten bolts 5 and 1 to 54 Nm (40 ft. lbs.).
c. Tighten engine mount bracket to insulator assembly thru-bolt to 54 Nm (40 ft. lbs.).
d. Tighten insulator assembly nuts to the lower radiator crossmember torque to 54 Nm (40 ft. lbs.).
e. Install mass damper and tighten to 54 Nm (40 ft. lbs.).