Power Locks: Service and Repair

AUTOMATIC DOOR LOCKS DISABLE OR ENABLE
The vehicle comes with two options for power door locks:
- Rolling automatic lock, ENABLE approximately at 29 Km/h (18 mph).
- No rolling automatic lock, DISABLE.

To change the automatic door lock selection, do the following:
1. Close all doors.
2. Cycle the ignition switch to from the OFF to RUN position four times and leaving the switch in the OFF position after the fourth cycle.
3. Press either door lock button to LOCK the doors. This procedure reverses the automatic door lock option, Enable to Disable, or Disable to Enable. If the present option is undesirable, repeat to arrive at the desired option. A single chime will signal programming completed.

The scan tool (DRB) may be used to Enable or Disable the automatic door lock feature.