Keyless Entry Module: Service and Repair

REMOVAL
1. Remove the instrument panel top cover. Refer to Instrument Panel Systems, Removal and Installation.

Fig. 3 Remote Keyless Entry (RKE) Module:

2. Remove screws holding RKE module to instrument panel structure. Located at the top left corner, to the right of the speaker.
3. Disconnect wire connector from RKE module.
4. Remove the RKE module.

INSTALLATION
1. Connect the RKE module wire harness to the module.
2. Position the module in the dash structure.
3. Install the retaining screws.
4. Install the Instrument Panel Top Cover.