Instrument Panel Center Bezel

INSTRUMENT PANEL CENTER BEZEL

REMOVAL

1. Disconnect and isolate the battery negative cable.

Fig. 2:

2. Pull center bezel straight rearward along the sides of the radio and A/C control openings to disengage four clips (Fig. 2).
3. Disconnect the Auxiliary Power Outlet wire connector.
4. Disconnect Auto Volume Switch wire connector.

INSTALLATION

1. Connect the Auxiliary power outlet wire connector.
2. Connect the auto volume wire connector.
3. Align the bezel with the retaining clips and push the bezel inward to install.
4. Connect the battery negative cable.