Computers and Control Systems: Tools and Equipment

REQUIRED TOOLS AND EQUIPMENT

- DRB III (diagnostic read-out box) scan tool
- Evaporative System Diagnostic Kit # 6917
- fuel filler adapter # 6922
- fuel filler adapter 1/4 turn # 8382
- fuel line adapter (C-6631) or # 6539
- fuel pressure gauge (C-4799-B) or # 5069
- fuel release hose (C-4799-1)
- minimum air flow fitting # 6457
- jumper wires
- ohmmeter
- oscilloscope
- ultrasonic leak detector # 6904
- vacuum gauge
- voltmeter
- 12 volt test light minimum 25 ohms resistance with probe # 6801

CAUTION: A 12 volt test light should not be used for the following circuits, damage to the Powertrain Controller will occur.
- 5 Volt Supply
- 8 Volt Supply
- CCD Bus
- CKP Sensor Signal
- CMP Sensor Signal
- J1850 PCI Bus
- Vehicle Speed Sensor Signal
- O2 Sensor Signal