Drive/Propeller Shaft
| Prop Shaft Flange Bolts | 70 Foot Pound-Force (ft.lb) | |
| Trans Front Mount Bolts | 45 Foot Pound-Force (ft.lb) | |
| Trans Rear Mount Bolts | 45 Foot Pound-Force (ft.lb) | |
| Trans Mnt Thru Bolt | 75 Foot Pound-Force (ft.lb) | |
| RUNOUT SPECIFICATIONS Note: Measure front/rear runout approximately 3 inch (76mm) from the weld seam at each end of the shaft tube. | Front Of Shaft | 0.010 inch |
| Center Of Shaft | 0.017 inch | |
| Rear Of Shaft | 0.010 inch |