Engine: Service and Repair

"B" Body:

"G" Body:

Removal

1. Disconnect battery.
2. Raise vehicle.
3. Disconnect exhaust at manifold.
4. Remove flywheel cover.
5. Disconnect transmission oil cooler lines at oil pan.
6. Remove left motor mount thru bolt, loosen right bolt.
7. Remove flywheel to torque converter bolts.
8. Remove bellhousing bolts.
9. Disconnect C.C.C. harness at transmission.
10. Disconnect knock sensor.
11. Disconnect fuel hoses at frame.
12. Remove lower fan shroud.
13. Disconnect starter wires. (G-Models)
14. Remove starter. (G-Models)
15. Lower vehicle.
16. Disconnect E.C.M. harness at engine.
17. Remove windshield washer bottle. (B-Models)
18. Disconnect necessary wires and vacuum hoses.
19. Remove air cleaner.
20. Remove upper fan shroud.
21. Remove accelerator and T.V. cables.
22. Drain radiator.
23. Disconnect heater hoses.
24. Disconnect radiator hoses.
25. Remove A/C compressor and lay aside.
26. Remove power steering pump and lay aside.
27. Disconnect transmission cooler lines at radiator.
28. Disconnect overflow tube. (B-Models)
29. Remove radiator. (B-Models)
30. Disconnect A/C hose at alternator. (B-Models)
31. Remove alternator adjusting brace. (B-Models)
32. Disconnect battery cables at frame.
33. Disconnect heater hose at bracket on intake. (B-Models)
34. Remove fan and pulley. (G-Models)
35. Remove hood.
36. Disconnect ground strap at rear of L/H head. (B-Models). Disconnect ground straps at both heads (G-Models).
37. Disconnect converter AIR pipe at exhaust manifold.
38. Disconnect AIR hose at converter AIR pipe.
39. Support transmission.
40. Remove engine.

Installation

^ For installation, reverse removal procedures.