| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Each Additional | 0.7 | 0.4 | A | Includes: R&R Cylinder Head & Oil Pan, hone Cylinder Walls And Plastigage Bearings. |
| One CYL |
| Right Bank | 10.8 | 7.7 | A | Includes: R&R Cylinder Head & Oil Pan, hone Cylinder Walls And Plastigage Bearings. |
| Left Bank | 9.8 | 6.9 | A | Includes: R&R Cylinder Head & Oil Pan, hone Cylinder Walls And Plastigage Bearings. |
| Both Banks | 13.7 | 9.7 | A | Includes: R&R Cylinder Head & Oil Pan, hone Cylinder Walls And Plastigage Bearings. |
| All Cyls |
| Right Bank | 11.8 | 8.5 | A | Includes: R&R Cylinder Head & Oil Pan, hone Cylinder Walls And Plastigage Bearings. |
| Left Bank | 10.8 | 7.7 | A | Includes: R&R Cylinder Head & Oil Pan, hone Cylinder Walls And Plastigage Bearings. |
| Both Banks | 15.7 | 11.1 | A | Includes: R&R Cylinder Head & Oil Pan, hone Cylinder Walls And Plastigage Bearings. |
| Note |
| To Grind Valves, Add | 2.8 | 2.0 | A | |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings, Renew | 1.0 | 0.0 | A | |
| Oil Pump, Renew | 0.5 | 0.0 | A | |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | |
| Rear Main Oil Seal, Renew |
| Manual Trans | 2.6 | 0.0 | A | |
| Auto Trans | 2.2 | 0.0 | A | |
| Timing Chain, Renew | 1.8 | 0.0 | A | |
| Tune-Up | 0.6 | 0.0 | A | |
| Crankshaft, Renew |
| Manual Trans | 5.3 | 0.0 | A | |
| Auto Trans | 5.1 | 0.0 | A | |