Troubleshooting Hints

TRY FOLLOWING CHECKS BEFORE DOING SYSTEM CHECK.
1. Check Relay Center Fuse 1.
2. Check Relay Center Fuse 2 by operating Radio and noting Power Antenna extending.
3. If at least one Door lock Motor locks and unlocks, but other Door Lock Motor(s) doesn't function normally, check wiring to that Motor. If wiring is OK, replace motor.
4. If a motor's internal circuit breaker trips, it does not reset until voltage is removed from motor.
^ Refer to System Check for a guide to normal operation. Initial Inspection and Diagnostic Overview
^ Refer to System Diagnosis for diagnosis tests. System Diagnosis