Troubleshooting Hints

TRY FOLLOWING CHECK BEFORE DOING SYSTEM CHECK.
1. Check that mirror is getting power by observing if label on mirror is illuminated in "MIN" or "MAX" position
2. Check Park/Neutral Position Switch and I/P Fuse Block Fuse 1B by checking Turn Flasher operation
3. Check I/P Fuse Block Fuse 1D by visual inspection.
4. Be sure photocells are not dirty or obstructed.
5. Check mirror and in-line connectors (see schematic) for proper terminal contact.
^ Refer to System Check for a guide to normal operation. System Check