Front License Plate Bracket - Fastner Kit & Installation
File In Section: 10 - BodyBulletin No.: 63-15-07
Date: April, 1996
Subject:
Front License Plate Bracket Fastener Kit and Bracket Installation Procedure
Model:
1996 Pontiac Grand Am
Some early production 1996 vehicles may not have the front license plate bracket fastener kit included in the vehicle from the factory.
In some cases, before the front license plate has been installed into the bracket, very "aggressive" car wash brushes have damaged the bracket. It is recommended that the front license plate bracket and license plate be installed at the time of customer delivery, after the vehicle has been washed, as follows:
Front License Plate Bracket Installation Procedure
1. Scribe the front fascia for location of the center mounting hole using the bracket as a template.
2. Drill 5.3 mm holes through fascia.
3. Use 3 pop rivets, P/N 10125439, to attach the bracket to the fascia.
4. Use only the pop rivets supplied, use of screws could result in bracket separation and/or tearing of the fascia.
Parts Information
Parts are currently available from GMSPO.