Evaporative Emissions System: Testing and Inspection

EVAP Pressure/Purge Diagnostic Station:

EVAPORATIVE EMISSIONS SYSTEM PURGE/PRESSURE DIAGNOSTIC STATION J 41413
The EVAP system purge/pressure diagnostic station is used to clear carbon released into the EVAP system by the canister. Carbon released into the EVAP system may cause EVAP system components to be inoperative. If diagnosis indicates that an EVAP system component needs to be replaced, the system should be checked for released carbon. A released carbon condition must be corrected before replacing any EVAP system component. Procedures for checking the EVAP system for released carbon and for correcting a released carbon condition are in the Diagnostic Aids for the applicable DTC tables.

EVAP SERVICE PORT
The enhanced EVAP service port is located in the evaporative purge hose located between the purge solenoid and the canister. The service port is identified by a green colored cap. The port contains a schrader valve and fittings to allow connection of J 41413 or equivalent evaporative pressure/purge diagnostic system.