Air Cleaner Housing: Service and Repair

REMOVE OR DISCONNECT
1. Fasteners from the air cleaner assembly (5).
2. Clamp from inter air intake duct.
3. Inter air intake duct from the air cleaner assembly (5).
4. Air cleaner assembly from the upper radiator support (4).

INSTALL OR CONNECT
1. Pre-assembly fastener to the air cleaner assembly (5).
2. Air cleaner assembly to the upper radiator support (4) and secure.
3. Clamp assembly to the front of the inter air intake duct and install on the air cleaner duct assembly (5). Force the duct forward until the duct assembly flange contacts the forward edge of the duct and air cleaner assembly (5).
4. Tighten the front clamp assembly to the inter air intake duct.

IMPORTANT: If the Mass Air Flow sensor is installed backwards, the system will go rich. An arrow cast into the plastic portion of the sensor indicates proper air flow direction. The arrow must point toward the engine.