Shock Sensor Adjustment

1. Remove the left instrument panel sound insulator. Refer to Instrument Panel.
2. Rotate the shock sensor adjustment knob counterclockwise to decrease the "warnaway" or short alarm sensitivity level. Rotate the shock sensor adjustment knob clockwise to increase the "warnaway" or short alarm sensitivity level.
3. Rotate the shock sensor adjustment knob in 30 increments, then test the sensitivity level by aning the system and simulating a small impact to the outside of the vehicle.

NOTE: When choosing to simulate a small impact to the outside of the vehicle, choose an area of the vehicle that will not sustain any damage when it is struck.

4. Repeat step 3 until the required sensitivity level is reached.
5 Install the left instrument panel sound insulator.