Turn Signals: Service and Repair

Description:

Remove or Disconnect
1. Open and support hood.
2. Screw from front parking/turn signal lamp.
3. Pull front parking/turn signal lamp from headlamp housing.
4. Twist and pull out side marker lamp socket from side marker lamp.
5. Depress locking tab, twist and pull out turn signal lamp socket from front parking/turn signal lamp.
6. Front parking/turn signal lamp from vehicle.
7. Pull bulb from side marker lamp socket.
8. Twist and pull out turn signal lamp bulb from turn signal lamp bulb socket.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Align bulb to side marker lamp socket and push in.
2. Align, push in and twist bulb in to turn signal lamp socket.
3. Push in and twist to lock in turn signal lamp socket into front parking/turn signal lamp.
4. Push in and twist to lock in side marker lamp socket into front parking/turn signal lamp.
5. Align front parking/turn signal lamp retainers to headlamp housing.
6. Screw to front parking/turn signal/side marker lamp.

Tighten
^ Screw to 2 N.m (18 lb.in.).

7. Close hood.