Remote Unlock Control Customization

Remote Unlock Control Customization Table:

IMPORTANT: If the ignition switch is moved to the "OFF" position during this procedure, the remote unlock control customization will be terminated and the system will remain in the most recent mode.

1. Remove the "MALL PGM" fuse from the fuse panel.
2. Turn the ignition to the "ACC" position. The seat belt telltale flashes and the chime will bong one or two times, equal to the current customization mode, number to indicate which mode the vehicle is in. Each time the transmitter "LOCK" button is pressed, the mode number will advance. A transition past mode two will repeat starting again at mode one.
3. To exit and save the current customization, turn the ignition "OFF" and replace the "MALL PGM" fuse back into the fuse panel. If you desire to customize other features, customize them before reinstalling the "MALL PGM" fuse into the fuse panel.