Instrument Panel Cluster Replacement

Description:

Remove or Disconnect
1. Instrument panel cluster trim plate.
2. Screws from top of instrument panel cluster.
3. Rotate top of cluster rearward and lifting up disengaging locating pins on bottom of instrument panel cluster from the instrument panel.
4. Electrical connectors.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Electrical connector.
2. Position locating pins on bottom of instrument panel cluster to locating pin receivers in instrument panel.
3. Rotate top of cluster inward and snap in locating pins on bottom of cluster at the instrument panel.
4. Screws to top of instrument panel cluster.

Tighten
^ Screws to 2 N.m (18 lb.in.).

5. Instrument panel cluster trim plate.