Instrument Panel Cluster Trim Plate Replacement

Description:

Remove or Disconnect
1. Battery ground (negative) cable.
2. Left instrument panel insulator.
3. Steering column opening filler.
4. Knee bolster bracket.
5. Lower steering column.
6. Grasp instrument panel trim plate bottom edge on both sides of steering column and pull to release retainer clips.
^ Continue pulling to release remainder of retainer clips.
7. Electrical connector from fog lamp switch.
8. Instrument panel cluster trim plate from instrument panel.

Install or Connect
1. Electrical connector to fog lamp switch.
2. Align instrument panel cluster trim plate locating pins and retainer clips to slots instrument panel.
3. Push in instrument panel cluster trim plate at each retainer clip location to lock in.
4. Raise steering column.
5. Knee bolster bracket.
6. Steering column opening filler.
7. Left instrument panel insulator.
8. Battery ground (negative) cable.