Table 4 - IPC Tests

In this mode of operation, the TECH 2 can command the IPC to override its normal operation and force the IPC to enable its outputs (gauges move, telltales lit etc...). This mode can be used to determine whether the IPC is "capable" of producing a given output. The outputs that can be controlled are listed on TABLE #4. This table is broken into sections that represent screens as they will be refered to on the TECH 2 scan tool.

TABLE 4 - IPC TESTS

FUNCTION DESCRIPTION UNITS/RANGE
IPC TELLTALES
NORMAL CONTROL ON/OFF

DRL RELAY ON/OFF
ETS SWITCH ON/OFF

VTD OPTION ON/OFF
ETS SWITCH ON/OFF

DRL OPTION ON/OFF
DRL BYPASS ON/OFF

COOLANT GAUGE
OFF OVERRIDE 100% -00%

TACH GAUGE SWEEP
OFF OVERRIDE 100% - 00%

SPEED GAUGE
OFF OVERRIDE 50% - 00%

FUEL GAUGE
OFF OVERRIDE 100% - 00%