Headlamps Replacement

REMOVAL PROCEDURE
1. Remove the bolts (3) that retain the inboard edge of the headlamp (1).
2. Push the fascia downward.
3. Pull the headlamp (1) slightly forward at the side marker.
4. Slide the headlamp outboard in order to disengage the locating pins (2, 4).
5. Remove the headlamp (1).
6. Remove the electrical connectors.

INSTALLATION PROCEDURE
1. Install the electrical connectors to the headlamp (1).
2. Install the headlamp (1).
3. Slide the headlamp (1) inboard in order to engage the locating pins (2, 4).

NOTICE: Refer to Fastener Notice in Cautions and Notices.

4. Install the bolts (3) in order to retain the headlamp (1).

Tighten
Tighten the bolts (3) to 5 N.m (44 lb in).