Power Mirror Switch

Removal Procedure

1. Disconnect the negative battery cable.
2. Remove the armrest applique.
Insert a small flat-bladed tool at the front of the applique in order to release the retaining clip.
3. Disconnect the electrical connector.
4. Loosen the setscrew that attaches the mirror control to the applique.
5. Remove the power mirror switch.

Installation Procedure

1. Install the power mirror switch to the applique.
2. Install the setscrew.

Tighten
Tighten the set screw to 0.4 N.m (4 lb in).

3. Connect the electrical connector.
4. Install the armrest applique.
5. Connect the negative battery cable.