Manual Transmission

Voltage is applied at all times from the PWR ACCY fuse through circuit 640 to the normally open contacts of the rear compartment lid release relay. When the rear compartment lid release button on the remote control door lock transmitter is pressed twice, voltage is applied from the body control module (BCM) through circuit 253 to the coil of the rear compartment lid release relay. If the park brake is set, the park brake switch is closed and the relay is energized. The relay then applies battery voltage through circuit 56 to the rear compartment lid release actuator. Ground is applied from G400 through circuit 1550 to the actuator. The rear compartment lid opens.