Instrument Panel Cluster Replacement

REMOVAL PROCEDURE
1. Remove the I/P trim pad.
2. Remove the I/P cluster bezel.
3. Remove the instrument cluster bolts (1).
4. Remove the instrument cluster (2).
Gently pull the cluster straight out to disconnect the electrical connector (3).

INSTALLATION PROCEDURE
1. Install the instrument cluster (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the instrument cluster bolts (1).

Tighten
Tighten the instrument cluster bolts (1) to 2.2 N.m (19 lb in) in sequence as shown.

3. Install the I/P cluster bezel.
4. Install the I/P trim pad.
5. Synchronize the instrument panel cluster (IPC).