Compact Disc Player (CD): Service and Repair

REMOVAL PROCEDURE




1. Open the rear compartment.
2. Remove the mounting nuts from the remote compact disc CD player housing.




3. Disconnect the electrical connector from the remote compact disc CD player.
4. Remove the mounting bolts/screws from the remote compact disc CD player.
5. Slide the remote compact disc CD player from the housing.
6. Remove the remote compact disc CD player housing from rear compartment.

INSTALLATION PROCEDURE




1. Align and install the remote compact disc CD player into the housing.





NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the mounting bolts/screws to the remote compact disc CD player.

Tighten
Tighten the remote compact disc CD player bolts/screws to 2 N.m (18 lb in).




3. Connect the electrical connector to the remote compact disc CD player.




4. Install the remote compact disc CD player housing to the rear compartment.
5. Install the nuts to the remote compact disc CD player housing.

Tighten
Tighten the remote compact disc CD player housing nuts to 7 N.m (62 lb in).

6. Close the rear compartment.