Troubleshooting Hints

NOTE: The Multi-Function Alarm Module will go to sleep 3 or 20 minutes after key off, depending if the vehicle has travelled over 24 km (15 miles). Until the Multi-Function Alarm Module goes to sleep, it will draw 60-80 ma. Once the Multi-Function Alarm Module goes to sleep, the amperage draw will drop to 3-15 ma.

1. Check the ALARM Fuse and the INT LAMP Fuse by visual inspection.
^ Refer to Doors in Body Service for Door access. Power Locks
^ Check for poor connection at Ground G304.
2. Interior Lamps Fuse opens continuously, remove the Multi-Function Alarm Module connector C2 and check for a short to ground in circuits 340, 1732, and 1733. If OK, replace the Multi-Function Alarm Module.