Instrument Panel Cluster Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Disable the SIR system.
3. Remove the instrument panel trim pad.
4. Remove the screws (1,3) from the top of the cluster (2).
5. Pull the cluster (2) rearward.
6. Remove the cluster (2).

INSTALLATION PROCEDURE
1. Install the cluster (2) to the instrument panel.
2. Install the screws (1, 3) at the top of the cluster (2).
3. Install the instrument panel trim pad.
4. Connect the negative battery cable.
5. Enable the SIR system.