Hardtop

UPPER EXTENSION TRIM PANEL REPLACEMENT






REMOVAL PROCEDURE
1. Remove the finish screw that retains the bezel to the front door upper trim.




2. Remove the finish screw that retains the remote control mirror bezel to the front door upper trim.




3. Remove the finish screw that retains the remote control power mirror bezel to the front door upper trim.
4. Disconnect the power mirror switch. (Power windows only).
5. Remove the upper trim finish panel from the front door.

INSTALLATION PROCEDURE




1. Install the bezel to the front door upper trim finish panel.




2. Install the remote control mirror bezel to the front door upper trim finish panel.




3. Connect the power mirror switch to the front door upper trim finish panel. (Power window only).
4. Install the front door upper trim finish panel to the remote control power mirror bezel. (Power window only).

NOTE: Refer to Fastener Notice in Cautions and Notices.

5. Install the screw to the front door upper trim finish panel.

Tighten
Tighten the screw to 1 Nm (12 lb in).