Front Steering Knuckle

Ball Joint to Steering Knuckle Nut to Install Cotter Pin (Maximum):
First 65 N.m (50 ft. lbs.)
Final 180°
Ball Joint to Steering Knuckle Nut to Install Cotter Pin (Minimum):
First 55 N.m (41 ft. lbs.)
Final 180°
Caliper to Knuckle Bolts 51 N.m (38 ft. lbs.)
Hub and Bearing Assembly to Steering Knuckle Bolts 95 N.m (70 ft. lbs.)