Instrument Panel Cluster (IPC) - Lens Replacement

REMOVAL PROCEDURE
1. Remove the IP cluster trim plate.
2. Remove the instrument cluster lens fasteners to the instrument cluster.

IMPORTANT: Ensure the instrument cluster lens surface is completely clean before assembly.

3. Remove the instrument cluster lens.

INSTALLATION PROCEDURE
1. Install the instrument cluster lens to the instrument cluster.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the instrument cluster lens fasteners to the instrument cluster.

Tighten
Tighten the fasteners to 1.9 N.m (17 lb in).

3. Install the IP cluster trim plate.