Front (SE)

REMOVAL PROCEDURE
1. Raise and support the vehicle.
2. Remove the electrical connector.
3. Remove the bolts (4) that retain the tog lamp (3) to the mounting bracket.
4. Remove the fog lamp (3).
5. Remove the U-clips (2).
6. Lower the vehicle.

INSTALLATION PROCEDURE

IMPORTANT: Inspect the tog lamp aim after the installation of the fog lamp. Refer to Fog Lamp Aiming Procedure. Adjustments

1. Install the U-clips (2).
2. Install the fog lamp (3).

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the bolts (4) in order to retain the fog lamp (3) to the mounting bracket.

Tighten
Tighten the bolts (4) to 3.2 N.m (28 lb in).

4. Install the electrical connector to the fog lamp (3).
5. Lower the vehicle.