Sun load and Twilight Sentinel Sensor Replacement

SUNLOAD AND TWILIGHT SENTINEL SENSOR REPLACEMENT




REMOVAL PROCEDURE
1. Remove the IP upper trim panel.
2. Disconnect the sunload (2) and the twilight sentinel (3) sensors from the IP upper trim panel by turning 1/4 turn.
Remove the sensors from the trim panel.
3. Remove the sensors.

INSTALLATION PROCEDURE
1. Install the sensors.
2. Install the sensors (2, 3) to the upper trim panel.
3. Turn the sensors a 1/4 turn to secure the sensors.
4. Install the upper trim panel.