Shift Interlock Switch: Adjustments

The first part of this procedure verifies that the shift cable is installed correctly, without tension. Perform the following steps:
1. Turn the ignition switch to OFF (unlock) position.
2. Place the shift lever at Neutral (N).
3. Unlock the shift cable at the transaxle the shift arm in order to eliminate tension.
4. Lock the shift cable.
5. Place the shift lever at PARK (P).
6. Inspect the shift indicator for proper adjustment. Refer to Shift Indicator Adjustment.
7. Inspect the neutral start switch for proper operation. Refer to PNP Switch Adjustment in Automatic Transaxle.
8. Inspect the BTSI for proper operation. If the condition still exists, continue with this procedure.