Cruise Control Switches

The following cruise control switches disengage the cruise control system:
^ The release switch
^ The stoplamp and TCC switch
^ The clutch switch or the clutch anticipate switch

These switches are mounted on the following components:
^ The brake
^ The accelerator
^ The clutch pedal bracket

When the brake pedal or clutch pedal is depressed, the cruise control system is electrically disengaged. Electrical disengagement is accomplished by activating the brake cut-out input to the cruise control module. The set speed will be retained in memory when the brakes are activated.

For an automatic transmission only, the stoplamp and TCC switch contains the following items:
^ A 3-wire stop lamp connector
^ A 2-wire TCC switch connector

The cruise control release switch has a 2-wire cruise control disable connector.
The clutch switch has a 2-wire cruise control disable connector.
The clutch anticipate switch has a 4-wire cruise control disable connector.





IMPORTANT: The vehicle is equipped with a Set To Get Cruise feature. This requires the operator to use the SET/COAST button before the RESUME/ACCEL slider switch will activate.

The OFF-ON-R/A switch (2) has the following 3 positions:
1. The OFF position
2. The ON position
3. The Resume Acceleration (R/A) position

When the R/A switch is held in for more than 1 second, the system starts the acceleration mode and accelerates the vehicle.
1. Hold in the switch until the desired speed is reached.
2. Release the switch. The vehicle will maintain the selected speed.

For operation of the acceleration mode, ensure that the following 2 requirements are met:
1. Turn the OFF-ON-R/A switch ON.
2. The vehicle is above the minimum speed limit of 40 km/h (25 mph) with a set speed already in memory.

The OFF-ON-R/A switch is used in order to incrementally raise the vehicle speed.

Follow these procedures in order to utilize this function:
1. Engage the cruise control system.
2. Quickly press the OFF-ON-R/A switch (2) towards the R/A position.
3. Quickly release the OFF-ON-R/A switch (2).
4. Tap the OFF-ON-R/A switch (2) in order to increase the speed by 1.6 km/h (1 mph).
5. Do not hold the OFF-ON-R/A switch (2) in the R/A position, the system will engage the accelerator mode.