Fog Lamp Replacement - Rear (Export)

REMOVAL PROCEDURE



1. Raise and suitably support the vehicle.
2. Disconnect the rear fog lamp electrical connector (1).




3. Remove the rear fog lamp self threading nuts.
4. Remove the rear fog lamp from the rear fascia.

INSTALLATION PROCEDURE



1. Install the rear tog lamp to the rear fascia.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the rear tog lamp self threading nuts.
Tighten

Tighten the rear fog lamp self threading nuts to 1.4 N.m (12 lb in).




3. Connect the rear fog lamp electrical connector.
4. Lower the vehicle.