Multifunction Turn Signal Lever Replacement - On Vehicle

REMOVAL PROCEDURE





1. Remove the steering column tilt wheel release lever, if equipped with cruise control. Refer to Tilt Lever Replacement - On Vehicle.
2. Remove the access cover, if equipped with cruise control.
3. Disconnect the electrical connectors (4, 5), if equipped with cruise control.





4. Grasp the lever firmly (1).
5. Pull the lever (1) straight out in order to remove.

INSTALLATION PROCEDURE





1. Position the tang (2) on the lever (1) to the notch (3) in the column (4).

IMPORTANT: Ensure that the wiper switch is in the OFF position before you install the lever.

2. Install the lever (1) to the column (4).

IMPORTANT: Ensure that the lever (1) is fully seated.

3. Install the electrical connectors, if equipped with cruise control.
4. Install the access cover, if equipped with cruise control.
5. Install the steering column tilt wheel release lever, if equipped with cruise control. Refer to Tilt Lever Replacement- On Vehicle.