Camshaft Position Sensor: Service and Repair

Camshaft Position Sensor Replacement

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Disconnect the electrical connector from camshaft position sensor.
3. Remove the camshaft position sensor retaining screw.
4. Remove the camshaft position sensor.

INSTALLATION PROCEDURE
1. Position the camshaft position sensor.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Hand start the camshaft position sensor retaining bolt.

Tighten
Tighten the retaining bolt to 5 N.m (44 lb in).

3. Connect the electrical connector.
4. Connect the negative battery cable.