Scan Tool Data Definitions

The SIR scan tool data definitions contain a brief description of all SIR related parameters available on the scan tool. The parameters that are available on the scan tool are listed below in alphabetical order.

Module Information 1
Calibration ID: The scan tool displays a 4 digit number. This calibration ID is the check sum of the SDM read only memory contents.

Julian Date of Build: The scan tool displays a 3 digit number. An example would be 723.723 is July 23 which is day 204 based on the Julian Calender.

PROM ID: The scan tool displays a 4 digit number.This number is the programmable read-only memory (PROM) ID.

Year Module Built: The scan tool displays what year the module was built.

Module Information 2
8 Digit GM Part Number: The scan tool displays an 8 digit pan number. This number is the GM part number that is stored within the SDM memory.

Component Serial #8-12: TBD

Component Serial #13-18: TBD

Data

Ignition Voltage: The scan tool displays 0-20 volts. The Ignition represents the system voltage measured by the SDM at its ignition feed.

Inputs

Driver Seat Belt Status: The scan tool displays Buckled or Unbuckled. The signal from the drivers seat belt switch indicates whether the driver seat is buckled or unbuckled.