Knock Sensor (KS) System Description

Knock Sensor System Description

Varying octane levels in gasoline can cause detonation in some engines. Detonation is sometimes called spark knock. Detonation is caused by an uncontrolled explosion (burn) in the combustion chamber. This uncontrolled explosion could produce a flame front opposite that of the normal flame front produced by the spark plug. The rattling sound normally associated with detonation is the result of two or more opposing pressures (flame fronts) colliding within the combustion chamber. Though light detonation is sometimes considered normal, heavy detonation could result in engine damage.

A Knock Sensor (KS) system is used in order to control spark knock. The KS system is designed to retard spark timing up to 20 degrees in order to reduce spark knock in the engine. This allows the engine to use maximum spark advance to improve driveability and fuel economy.

The knock sensor system is used to detect engine detonation. The knock sensors produce an AC voltage which is sent to the PCM. The PCM retards the spark timing based on signals from the KS sensors. The amount of AC voltage produced by the sensors is determined by the amount of knock. The PCM then adjusts the Ignition Control (IC) to reduce the spark knock.