Coast Position

With the switch fully depressed, you may raise or lower the control speed. In order to increase the control speed, complete the following steps:
1. Accelerate to a new speed.
2. Fully depress the switch.
The controller releases the previously set speed.
3. Once you release the switch, the new speed sets.

Pushing the brake pedal releases the cruise control, but not the cruise capability.

You may also set an increased control speed by using the RESUME/ACCEL switch as described later in this section.

In order to decrease control speed, hold the switch in the depressed position. This action disengages the cruise control and allows the throttle to return to the idle position. When the vehicle has slowed to the desired cruise speed, release the switch in order to re-engage the system.