Tap-Up Position

IMPORTANT: In order to keep the vehicle under control, and to prevent possible vehicle damage, do not use the cruise control if the following conditions exist:
^ Slippery roads
^ Winding roads
^ Heavy volume or varying volume traffic

In order to tap-up the vehicle speed, use the RESUME/ACCEL switch. Ensure that the cruise is engaged and operating. In order to tap-up, complete the following steps:
1. Quickly press the RESUME/ACCEL switch down.
2. Quickly release the switch (or tap the switch).

The system will revert to the ACCEL mode if you hold the switch in the RESUME/ACCEL position. The tap-up allows you to increase the cruise speed by 0.62 km/h (1 mph) increments (1 tap equals 1 mph increase). Depress the accelerator at any time in order to override the cruise system. Release the accelerator in order to return the vehicle to the previously set cruise speed.