Instrument Panel Cluster (IPC) - Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the cluster trim plate.
3. Remove the screws attaching the cluster (2).
4. Pull the cluster (2) rearward in order to remove the cluster.
5. Disconnect the electrical connector.

INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the cluster (2) to the instrument panel (1).
3. Install the instrument panel cluster attaching screws.
4. Install the cluster trim plate.
5. Connect the negative battery cable.